Showing posts with label adhesive. Show all posts
Showing posts with label adhesive. Show all posts

Tuesday, July 21, 2009

But where do you put it?

I have been asked before what the heck I do with my ATG when I'm not using it- it looks like it takes up a lot of real estate which is usually quite precious to a crafter. Well, I have seen people make little stands for theirs, or balance it in a coffee cup, and I've even seen someone drill a hole in the bottom of theirs so they can put a binder ring through it. Theoretically you can hang it from said ring. Also, if you use peg board some well placed brackets could give your gun it's own home on the wall!

I do none of those things though. I recently discovered that the flat top allows me to balance my gun on it's head, making it take up very little desk space and making it *extra* easy to spot!

As I've mentioned before, it is quite light, so I often just sort of toss it on top of whatever pile is nearest on my desk. I don't have to worry about it crushing any delicate paper or making it difficult to get out things hidden underneath.

Yes, my desk has gotten messy. I need to hang that shelf!

Friday, July 17, 2009

For Randy

My co-worker Randy was fascinated by the ATG when I explained what it was to him, and was quite surprised by the need for that much adhesive, so this post is for him.

This is my ATG. It is quite large, but is lightweight and easy to maneuver. It has a pretty new 36 yd roll of adhesive tape in it.

Here is my box of 12 refill rolls, along with the other refill I still had. So that's 13 rolls of 36 yards of adhesive each. Not too shabby.

See how little space each roll takes up? The is another fine reason to use an ATG- no ridiculous pop-in refills and all their excess packaging to store.

See this cute little box? It sites on my craft table.

For kicks, I am saving all my empty plastic rolls in there. I got my gun in January and as you can see have gone through 4 rolls- that's with taking a substantial crafting hiatus this year. You can once again see how little waste this type of adhesive refill creates.

Here is the project I have been working on and wound up using some absurd quantity of adhesive on. It's still unfinished, so I don't have many photos of it. The black strips you see up top? Those are the base of each page- black chipboard. Chipboard is a fancy name for a specific flavor of cardboard, but it's basically fancy cardboard.

Here are the first two pages- do you see how they are completely covered? Each page is like that. There is not actual black showing except on the cover. Because everything is exposed to fingers, it needs to be thoroughly secured which means lots of tap. Let's also acknowledge the many layers we see here.

So you see, the ATG is glorious for several reasons, and it's certainly something I feel I got my money out of. Which is a good thing, because seriously? $40 for a tape dispenser? I too thought that was over the top lunacy. But I love that sucker as much as one can love a tape dispenser (which apparently is quite a lot).

Friday, January 16, 2009

Stickiness and some cards

First thing first, I got my ATG! Here is a picture comparing it to some of my other adhesives. It's a biggie for sure.
I had read before that there is a learning curve to using this sucker. When I read that, I of course thought, 'what the heck is there to learn, you roll on glue???' Well, turns out, they're not lying. You have to be careful when you finish rolling out adhesive and go to remove it- you have to be sure to pull back firmly and not up. The adhesive sticks to itself better than anything else, so it's natural inclination is to stay attached to the rest of the adhesive that you are currently moving far away from your project, so it is imperative that you effectively break the string of adhesive.

So there you go- learning curve.

In addition to playing with tape, I also made some cards! I received a Cuttlebug recently but had not yet had a chance to test it out. I purchased a few embossing folders and dies also, and was stoked to use them.

Here is a card I made using the swiss dot embossing folder and a cute heart die along with oval nestabilities. I like hearts. A LOT, so I had to dig deep to find some restraint once I purchased this heart die and say 'don't go buy anything else heart related'.
I enjoyed using my nestabilties, although I was pretty much convinced when removing them from their packaging that I was going to bend them. I knew they were thin, but apparently my understanding of the word thin is inadequate. Wafer thin! I need to give them a more reasonable home though right now they live in an old photo sleeve I had.

I got a little carried away with the butterflies on this one. And the texture. I like it anyway though! In addition to really liking hearts I really like butterflies. And unicorns and puppies and kitties and and and....

Ok card:

More hearts! Yay hearts! I purchased a bunch of papers from the American Crafts 'Romance' line a while back, this was the first time I had a chance to use any of it though. I like the line a lot and think I will end up using most of it on cards.

Finally, I was able to work on those thank you cards from the doggie. I decided I wanted to make it a simple single layer card. I don't have any thought bubble stamps, so what I did was trace around one of my scalloped oval nestabilities. It's not perfect, but way better than I would have been able to do free-hand!

I decided to color the stamped image with a sharpie ultra fine point marker instead of my pencils. I must say, I love the results! I may have to get a few more markers. Sharpie: the poor woman's Copic!

Thursday, January 8, 2009

I am in adhesive purgatory!

Yes, I am in tape purgatory! This is the source of my many woes:

I had been using tombow mono multi happily for quite awhile, but was longing for a tape runner again. I had heard many good things about the dot 'n roller and decided to take the plunge. I ordered one snazzy little dispenser and 6 refills. I tested it out and was immediately in love! Adhesive love. Heh. STP anyone? Anyone?

I digress. Back to my agony. I tried it, loved it, and happily toted my new dispenser and 2 refills to an overnight crop with me. All was going well- I was cruising along and had done several layouts I was quite pleased with when it came time to pop in a refill. Then my happiness quickly dissipated as the unthinkable happened- my refill didn't work properly! Crap! Basically the uptake roll which collects the empty plastic strip is not rolling back, so the tape strip stays stuck to the paper leaving a great big mess and the need to take the thing apart and manually roll the strip back in. I end up with not enough adhesive on my project for it to stick, but enough left on the plastic strip to get all over my hands, pants, desk, really anything nearby.

Thankfully, I was smart and brought another refill with me. Problem was, that one didn't work either. Now I was in deep sh!t. It was very late at night and I was at an overnight crop in some remote camp ala Jason movies. CRAP! Luckily, I'm super prepared and actually brought about a billion adhesives with me, so I was not without stickiness.

Ok, fast forward, I go home and try out my other 4 refills, and they are sucked! Ack! I had purchased these online so I was a little worried about exchanging them, but the folks over at scrapbook.com were oh-so-nice and sent me 6 brand spankin' new refills cartridges! Hooray! 5 of my bad refills were from the same lot, and the 6th was from the next sequential lot.

Ok, so I sat down the other day to make some thank you cards, like a good little gift recipient when what should I discover? Why my replacement refills also suck!

Now I have invested probably a few hours of my life attempting to understand what my refills are doing when they are not working properly and have to figure it out. A few hours is a lot of time to spend considering adhesive. So finally, I have given up and succumbed to societal pressure and ordered, you guessed it, and ATG-714. The Cadillac of adhesives. It came with 3 rolls of 908 acid free Gold tape and I purchased another 3 rolls for a grand total of 216 yards of 1/4" sticky goodness.

Because I have been moderately obsessed with my little adhesive dilemma, I decided while I was trying *one more time* to correct my adhesive misbehavior I would take pictures. Because that's what scrapbookers do: we take pictures of things that really don't deserve to have their picture taken. Enjoy.

Starting to roll. Not too bad. A little slack isn't so bad....

Hmmm, maybe it's more than I realized...



It does not appear to be getting better...


So you see how this can become problematic:


Yeah, no good. Probably funny for the people who saw me ripping up huge strips of the stuff and doing battle with clear sticky tape and midnight.

On to a more positive note! Here are the cute little images I plan on using the yet to be constructed thank you notes:


There are actually going to be thank yous from the dog to the family members who purchased her goodies. We're a polite family. When I was visiting my parents my mom cleaned out her arts supply stash and found an unused box of Derwent watercolor pencils. Yeah, completely unused! Full set too- 72! So now I have watercolor pencils. This was my first foray into watercoloring since probably elementary school. I'm pleased with the results and look forward to practising more. Here's a close-up.


The stamp is from Amuse, also a Chrismakah present, but for me. Madison would only chew on stamps if they were given to her.